Engine out

As the title says, I lifted the engine and gearbox

Had no idea that it would be so heavy. It is right on the limit of what the front end loader will lift. I will certainly need some help getting it back in again but there is a local chap with a hiab on a small truck so I may ask for his help.

The only casualties were the small unloader plastic hose to the compressor and the two front engine mounts that just fell apart.

Got straight to it and pressure washed all the chassis and pipework that was inaccessible with the engine in place

Old cab off

After being a bit slack for the last month or two (actually putting some extra lights and sockets into my workshop) I finally got the chassis parked up where it won't be too much in the way and took the old cab off. Summer is coming in this part of the world so it does not matter too much if it is all parked out for a few months.

It was a much quicker job than I expected, bring out the imperial spanners -

1. Remove pedals (2)
2. Unplug wiring loom
3. Disconnect steering column
4. Disconnect earth strap
5. Disconnect engine stop cable
6. Disconnect throttle linkage
7. Disconnect radiator filler hose
8. Disconnect air filter and breathers (2)
9. Remove gear lever
10. Disconnect handbrake pipes (2)
11. Disconnect emergency brake valve pipes (2)
12. Disconnect speedo cable
13. Disconnect pipes to brake pressure gauges (2)
14. Remove alternator regulator
15. Remove cab bolts (4)

With no windscreen fitted all you need is some forks on the front-end loader and a plank...

The coolant came out clean as a whistle which is encouraging considering how many years it's been in there!

I marked some pipes with paint and took plenty of photos.

Cab spraying complete

My spraying is passable but not great so for the outside of the cab I called in my brother, Hugh, who has done quite a bit of spraying: boats rather than cars.

The scheme is to - 

1. Mask up all the openings so that the overspray does not spoil the previous work
2. Wet the floor with water to keep the dust down.
3. Wipe the whole thing down with wax and grease remover
4. Wipe the whole thing over with a tack rag to remove dust
5. One light coat that just covers everything
6. Wait for the coat to be just dry enough to touch without it coming off on your finger
7. One heavy coat and wait for it to be just dry again
8. Thin the paint and one final coat
9. Walk away and leave it alone for 24 hours

Spraying the first coat video

The man at work

And the finished article - 

Interior painting done

This weekend I painted the last of the interior: the dashboard and a few other spots that needed some colour.

There was some paint left in the gun so I did the door inners and the inside of the outer mudguards too.

The next task is to mask off the whole interior and spray the outside and the doors all in one go. My spraying is average at best so I will get my brother to come over and do these bits that really show.

Overspray and (some) shiny bits

I have been discovering all about over-spray! I had not really appreciated that if you are painting something in sections the over-spray from one session spoils the previous one and so on... Time to start planning better and masking as needed.

I was not too happy with the results anyway so I asked my brother who has done quite a bit of spraying (boats rather than cars). His advice as to spray on one quick coat, not worrying too much about the look and the coverage, then wait until the coat was just dry enough to touch and then put on a second coat much thicker.

This I tried around the sides of the roof and got a much better result. Not professional quality by any stretch of the imagination but if you look hard enough you can see the workshop lights reflected in the shiny paint!

More colour going on

Not much so say here. Some pics of the painting progress.

A turning point

It may not seem like much but I actually bolted something back together for the first time this project. The brace bar that runs across behind the front panel. It's not nearly strong enough to help in a crash so I guess it is just a stiffener. 

There should be another upright but somehow that didn't get sprayed! I'll have to do it next time.